Exterior Painting • Houston TX
Hardie Board & Fiber Cement Painting
Hardie board and fiber cement siding washed, recaulked and repainted with 100% acrylic for Houston sun and rain. Get a free instant quote.
Executive Summary: Hardie Board Painting Houston
Hardie board painting in Houston washes, recaulks, spot-primes and repaints fiber cement siding and trim.
Fiber cement gets primer + topcoat: spot primer on cut edges, then 2 coats of 100% acrylic. A 3 to 6 painter crew usually needs an estimated 2 to 7 days, and Houston-area pricing runs about $2 to $4.50 per square foot, or $4,000 to $9,000 for 2,000 sq ft (estimates).
Rain delays recaulking and paint, and damaged boards need a siding contractor first. Older homes with original wood trim need lead paint testing if built before 1978.
Typical Houston Projects
Three common fiber cement jobs and how we scope them. These are typical scopes, not past projects.
Example scope: Two-story Hardie home, Cypress (77429)
What to expect: about 4 to 6 days (estimate), with Houston-area pricing usually at $2 to $4.50 per sq ft.
See the full scope
Project Size: about 3,000 sq ft of lap siding and trim
Neighborhood: Cypress (77429)
Service: Hardie Board & Fiber Cement Painting
System: wash, recaulk, spot primer + 2 coats of 100% acrylic
The Problem: failed caulk at windows and faded south walls
The Solution: wash and dry, recaulk every window and trim joint, spot-prime, then 2 coats
Example scope: Color change on fiber cement, Sugar Land (77479)
What to expect: about 3 to 4 days (estimate), in the typical Houston-area range of $4,000 to $9,000.
See the full scope
Project Size: one-story home with Hardie siding
Neighborhood: Sugar Land (77479)
Service: Hardie Board & Fiber Cement Painting
System: wash, primer where colors change sharply + 2 coats
The Problem: a beige exterior changing to a dark blue-gray
The Solution: prime for the color change, then 2 coats; dark colors suit fiber cement better than wood
Example scope: New-build first repaint, The Woodlands (77382)
What to expect: about 3 to 5 days (estimate), typically $2 to $4.50 per sq ft based on Houston-area pricing.
See the full scope
Project Size: home with factory-primed boards painted once by the builder
Neighborhood: The Woodlands (77382)
Service: Hardie Board & Fiber Cement Painting
System: wash + spot primer + 2 coats of 100% acrylic
The Problem: thin builder paint wearing through on sunny sides
The Solution: wash, prime bare edges, then 2 full coats
Stop Letting Fading & Damage Hurt Your Property Value
Cracked caulk at trim and windows
Fiber cement holds paint well, but caulk fails first and lets water behind the boards. We cut out old caulk and recaulk every joint.
Thin builder paint
Many new homes get one thin coat over factory primer. We add 2 full coats of 100% acrylic so color lasts.
Bare cut edges
Cut ends and nail heads soak up water if left bare. They get spot primer before paint.
Schedule a Walkthrough
We check caulk, cut edges and clearances at the ground and roof, and note faded walls. The written estimate lists caulk, primer and coats by area.
Our Process: Done Right the First Time
- 1Detailed Estimate & Color ConsultationWe walk the siding with you, check every caulk joint, cut edge and ground clearance, and confirm colors. Cracked or swollen boards get flagged for a siding contractor.
- 2Expert Prep & PaintingSiding gets washed and dried, old caulk gets cut out and replaced and bare edges get primed. Two coats of 100% acrylic follow.
- 3Final Walkthrough & Clean-UpWe walk each side with you and check the new caulk lines at windows and trim. Old caulk and tape get cleaned up before we leave.
What to Expect: Your Project Timeline
| Stage | When | What Happens |
|---|---|---|
| Estimate & booking | 1 to 2 weeks ahead | Caulk and edge check, colors, written estimate |
| Prep day | Day 1 | Wash and dry, cut out failed caulk |
| Paint application | Days 2 to 5 | New caulk, edge primer, 2 coats of acrylic |
| Dry & walkthrough | Final day | Caulk-line walkthrough with you |
| Curing | First few weeks | Caulk and paint cure; skip pressure washing |
These are estimates. Rain can add a day.
The Right Time to Schedule Hardie Board Painting Houston
Caulk is cracking.
Recaulk and repaint before water gets behind the siding.
Builder paint is wearing thin.
Most new homes need their first real repaint within several years.
The fence has faded next to the new siding.
Paint it while the crew is on site; see Fence & Gate Painting Services.
Booking Dry Weather
Hardie repaints need dry days for caulk and paint. Spring and fall work best, and summer jobs start early.
The Henry Contractor Difference
No hidden fees
Your written estimate lists caulk, primer and coats by area before work starts.
Local Houston crews
Local Houston crews paint fiber cement homes across Katy, Cypress and The Woodlands.
Prep done by the book
Wash, dry, recaulk, prime edges, then paint.
Transparent Pricing for Hardie Board Painting Houston
| What Affects the Cost | Standard vs. Premium | Hidden Costs to Watch For |
|---|---|---|
| Size: siding area, stories, trim | Standard mid-grade acrylic; premium a fade-resistant top line | Second-story Hardie walls add about 40 to 50% per sq ft (estimate) |
| Condition: caulk failure, bare cut edges, fading | Standard primes edges and patches; premium primes full walls on color changes | Swollen boards replaced by a siding contractor |
| Extras: doors, garage doors, fences | Standard covers siding and trim; premium adds doors | Lifts for tall gables |
Typical Houston-area range for fiber cement siding (estimate): $2 to $4.50 per square foot, or $4,000 to $9,000 for a 2,000 sq ft home. Your written estimate after an on-site walkthrough sets the exact price.
Get an Exact Number
How much caulk has failed and how tall the walls are set most of the price. We check both and write it down.
Hardie Board Painting Houston vs. DIY vs. Cheap Labor
| Feature | Henry Contractor | DIY | Cheap Labor |
|---|---|---|---|
| Prep Work Quality | Wash, recaulk, prime cut edges, 2 coats | Paint over cracked caulk | Caulk only the obvious gaps |
| Time Investment | Most Hardie homes: 2 to 7 days (estimate) | Weekends on tall ladders | Quick spray, one coat |
| Material Quality | 100% acrylic and flexible paintable sealant | Bargain paint and silicone caulk | Silicone that will not hold paint |
| Clean-Up Process | Old caulk and tape removed | Caulk tubes left behind | Overspray on windows |
| Pricing Transparency | Written estimate with caulk as a line item | Caulk guns, ladders and paint add up | Caulk work billed extra |
Who We Partner With
Homeowners
Your Hardie siding is fading or the caulk is failing. We fix both in one visit.
Property Managers
Newer rentals with Hardie siding need their first real repaint within several years. We schedule it between tenants.
HOA Board Members
Fiber cement communities share colors across hundreds of homes. We match the approved palette exactly.
Proudly Serving Greater Houston
We proudly provide professional painting services to homeowners and businesses throughout the Greater Houston area, including: The Woodlands, Katy, Sugar Land, Pearland, Cypress, Memorial, and surrounding neighborhoods.
We paint fiber cement homes in Cypress, Sugar Land and The Woodlands (77382), plus newer builds in Katy (77494).
Other siding types are on the Exterior Painting Houston TX page.
Frequently Asked Questions
Hardie board painting usually requires cleaning, recaulking joints, spot-priming bare cut edges and two coats of 100% acrylic exterior paint. Fiber cement holds paint well, but failed caulk and open joints let water in behind it. Most homes take an estimated 2 to 7 days, weather permitting.
Wood trim on the same house follows Wood Siding Exterior Painting.
The short answer is about $2 to $4.50 per square foot of paintable surface, or roughly $4,000 to $9,000 for a 2,000 sq ft home, based on typical Houston-area pricing. Square footage, stories, siding type and repairs move the number. Your written estimate sets the exact price.
A second story adds roughly 40 to 50% per square foot for ladders and setup (estimate).
Hardie board painting usually requires a wash to remove dirt and chalk, a full day of dry time, cutting out cracked caulk and recaulking trim and window joints, spot-priming bare cut edges and nail heads, and checking that boards are not touching the ground or roof where water wicks in.
Factory-primed boards that were never painted need a full topcoat system soon after install.
The short answer is longer than painted wood siding, because fiber cement barely swells or shrinks with Houston humidity, so the paint film is not stretched. Sunny walls fade first, and failed caulk at trim and windows is usually what sends a Hardie home back for paint early.
Lighter colors hold up longer on south and west walls.
The short answer is yes, and it is where most Hardie repaints fail. Joints, butt seams and trim gaps are caulked before primer so water cannot sit behind the board. Failed caulk is cut out and replaced rather than painted over.
Caulk lines get checked once more after priming, because gaps open up as the primer dries.
Ready to upgrade your property?
Fill out the free estimate form at the top of the page to get started, or call us directly to schedule your on-site consultation.